Back to List
	The designation of delegation, mandatory and non-mandatory CALNET 2 services is identified in the Contractor's products and services
	matrix for each Master Services Agreement.
	The determination of delegated, mandatory and non-mandatory CALNET 2 services is at the sole discretion of the Department of
	Technologoy Services.
	Service Identifier: Carrier DS3 Service
	Description of Service
	DS3 service supports point-to-point digital data circuits up to 44.736 Mbps providing full duplex, synchronous serial digital data transport.  DS3s may be
	clear-channel or channelized into 28 channels.
	·        Carrier DS3 service shall include the following:
	·        High Capacity DS3 - Describes High Capacity DS3 Class of Service
	·        Subscriber Access Line with Equipment - DS3 circuit termination per termination with electrical equipment
	·        Central Office Multiplexing - An arrangement that converts a 44.736 Mbps channel to 28 DS1 channels using digital time division multiplexing
	DS3 service shall be in accordance with the North American T-carrier, and applicable ANSI and ITU Standards.
	Availability
	Fiber optic facilities must be available at the end user.
	DS3 Service and Features
	Feature Name	Identifier	Feature Description	Non-Recurring Charge	Recurring Rate	Unit of Measure
	DS3 Service Intra Lata	Z35AC	DS3 provided under the service name High Capacity Service (HiCap DS3 or T3). The DS3 channel termination connects the customer’s site with the serving central office at 44.736 Mbps (DS3).	$  1,100.00	$  1,014.75	Channel Term
			Two channel terminations are required for end-to-end 44.736 Mbps service within the same serving central office. Can also connect to other services,
			such as interoffice transport (mileage), multiplexing, or frame relay. Total interstate traffic (including Internet traffic) on the circuit(s) must constitute 10% or less of the total traffic.
	DS3 Service Inter Lata	1LNR9	DS3 is provided under the service name High Capacity Service (HiCap DS3 or T3). The DS3 channel termination connects the customer’s site with the serving central office at 44.736 Mbps (DS3).	$  1,100.00	$  1,014.75	Channel Term
	DS3 Service  Inter State	1LNR9	The DS3 channel termination connects the customer’s site with the serving central office at 44.736 Mbps (DS3). 2-channel terminations are required for end-to-end 44.736 Mbps service within the same serving central office.	$  1,100.00	$  1,014.75	Channel Term
			Can also connect to other services, such as interoffice transport (mileage), multiplexing, or frame relay.
			Total interstate traffic (including Internet traffic) on the CPUC circuit(s) must constitute 10% or less of the total traffic.
	Variable Mileage for Dedicated Transport Services (excludes Frame Relay and ATM) Intra Lata	1L59X	Distance sensitive fixed and variable mileage. Mileage measured as the airline mileage between the serving central offices. Does not apply to circuits terminating on an AT&T Frame Relay or ATM switch.	N/A	$      62.07	per mile
	Variable Mileage for Dedicated Transport Services (excludes Frame Relay and ATM) Inter Lata	1LNGX	Distance sensitive fixed and variable mileage. Mileage measured as the airline mileage between the serving central offices. Does not apply to circuits terminating on an AT&T Frame Relay or ATM switch.	N/A	$      11.35	per mile
	Variable Mileage for Dedicated Transport Services (excludes Frame Relay and ATM) Inter State	1LNGX	Distance sensitive fixed and variable mileage. Mileage measured as the airline mileage between the serving central offices. Does not apply to circuits terminating on an AT&T Frame Relay or ATM switch.	N/A	$        9.08	per mile
	Customer Network Reconfiguration	RFND3	Allows the customer to make software defined cross-connect changes in the individual circuit segments of their network. Allows Customer changes to connections of individual circuit segments at DCS node,	N/A	$           -	Monthly
			either proactively or within minutes of a trouble detection
	Central Office Multiplexing with Reconfiguration	MQ3, MQ4	An arrangement that converts a 44.736 Mbps channel to 28 DS1 channels using digital time division multiplexing.	N/A	$     410.00	Monthly
	Additional Carrier DS3 Service and Features
	Feature Name	Identifier	Feature Description	Non-Recurring Charge	Monthly recurring charge	Unit of Measure
	Expedite	EODXP	The installation interval for DS3 is negotiated on an individual case basis. Expedited installation intervals are negotiated on an individual case basis.	$     400.00	N/A	occurrence
	Customer Premises Equipment (CPE) and Services
	AT&T offers a variety of CPE and pre-implementation, implementation and post-implementation services for CPE in support of all WAN access services.
	See Required CPE and Other Equipment for descriptions of additional equipment and services offered.